Compatibility | C-TEC’s Quantec and 800 Series Call Systems. Must be used in conjunction with NC805P Pneumatic Pad. |
Quiescent current | 0mA (none). |
Alarm current | Determined by the type of control equipment and number / type of field devices connected to the system. |
Indicators | Reassurance LED on host call point will illuminate steady when the NC805AS Air Switch is activated and/or removed. |
Controls | Applying sufficient air pressure (0.9 p.s.i or 6220 Pa) to the NC805P Pneumatic Pressure Pad causes the host NC805AS Air Switch to activate and generate a Standard call if connected to a compatible Quantec or 800 Series call point. |
Connections | 6.35mm (quarter inch) jack plug. Spigot provided for connection of Pneumatic Pad tubing. |
Onboard Sounder | No. |
Onboard Infrared Receiver | No. |
Product dimensions (mm) | 35mm diameter x 72mm long. |
Construction & finish | TBC. |
IP Rating | IP20. |
Weight | TBC. |
Operating conditions/temperature | -5ºC to +40ºC. Max. relative humidity 95% non-condensing. |
Notes | Designed to be operated at voltages of less than 30Vd.c. and must only be operated by air. Liquids must not be used. The electrical switch characteristic will switch a 0.5A resistive load @ 30Vd.c. Mains voltages must never be used. |
All prices are subject to change due to supply chain fluctuation. We endeavour to keep the website updated where possible.
Air Switch for NC805P
£65.00 excl VAT
- Designed for use with C-TEC’s NC805P Pneumatic Pad.
- Applying pressure to the NC805P operates the air switch which in turn triggers a Standard call when the 6.35mm jack plug on the NC805AS is connected to a compatible call point’s remote socket.
- Operates at a minimum differential air pressure of 0.9 p.s.i (pounds per square inch) or 6220 Pa (pascals) ± 10% at 16ºC.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.